Introduction of top-mounted magnetic flap level gauge

Introduction of top-mounted magnetic flap level gauge

    The top-mounted magnetic flap level gauge consists of a body, a flap box (composed of red and white two-color magnetic flaps), a float, a flange cover, etc., and is used for liquid level measurement of various liquid containers. The color quartz tube level gauge can be used in high temperature, explosion-proof, anti-corrosion, food and beverage and other occasions, as the local display or remote display and control of the liquid level. The top-mounted magnetic flap level gauge can achieve high sealing, anti-leakage and safe and reliable measurement of liquid level under high temperature, high pressure, high viscosity, and strong corrosive conditions. The whole process of measurement has no blind spots, eye-catching display, and intuitive reading. And the measuring range is large, equipped with liquid level alarm and control switch, can realize the upper and lower limit alarm and control of the liquid level or interface level, and the SK series liquid level transmitter can adjust the liquid level. The boundary signal is converted into a two-wire 4-20mADC standard signal to realize remote detection, indication, recording and control. Top-mounted magnetic flap level gauges are widely used for level measurement and control in the production process of power, petroleum, chemical, metallurgy, environmental protection, shipbuilding, construction, food and other industries.

working principle:

   The flap box outside the main body of the top-mounted magnetic flap level gauge is actuated by the float in the main body (with a directional magnetic source, developed according to different media and pressures) to make the flap flip and display red and white colors. The copper solenoid valve is in parallel. The movement of the float indicates different liquid level. There is an eye-catching scale ruler on the left side of the indicator to make the liquid level indication more clear.

Installation, use and maintenance:

1. The connecting rod cannot be bent and must be inserted straight;

2. The protective pipe of the level gauge and the main pipe must be kept vertical;

3. After installation, the turning column of the display needs to be guided by a magnet once to make it display white above zero and red below zero.

Features:

1. The viewing direction of the display can be changed arbitrarily

2. Add different colors of liquid every 10 minutes to make the liquid easy to identify.

3. If the power is interrupted, switch on site. It is not affected, and the accuracy is high.

4. The top-mounted magnetic flap level gauge is suitable for liquid media with high viscosity.

5. The liquid level switch transmitter and control switch are installed, and the gas solenoid valve can be installed and adjusted at any time without stopping the machine.

6. The top-mounted magnetic flap level gauge can be installed on the upper or lower part of the container when the opening on the side of the container is not suitable and the space around the container is small.

This article is original by electric actuator manufacturers, please indicate http://www.sungofluid.com/