Why solenoid valves are favored

Why solenoid valves are favored

     Traditional valves require many fittings and pipelines to be installed before they can be used. Solenoid valves are connected by electric actuators and valves. After installation and debugging, they become solenoid valves. The use of automatic control valves is indispensable in terms of operating efficiency and saving energy consumption. , The manual valves and pneumatic valves commonly used in the traditional industry are not as good as solenoid valves in terms of installation cost and efficiency. Therefore, the price of traditional valves is not dominant, but more maintenance costs.

      To put it simply, the solenoid valve uses an electric actuator to control the valve, so as to realize the opening and closing of the valve. The gas solenoid valve uses electric energy as the power to turn on the electric actuator to drive the valve, and realize the on-off and regulating action of the valve. So as to achieve the purpose of switching or adjusting the pipeline medium. It can be divided into upper and lower parts, the upper part is electric actuator, and the lower part is valve. In addition, the opening and closing of the motor drive is smoother, without the shortcomings of excessive momentary force, and the failure rate can be greatly reduced.

　　　 valves are mostly used in industrial processes to control the travel and flow of various fluids, such as water, oil, chemical liquids, etc., based on parameters such as temperature, pressure and flow. Because the general traditional pneumatic valve is used, it is inevitable to have piping, solenoid valve and compressor to match, and the high-temperature solenoid valve is driven by a motor, which is simple and convenient to install, and the solenoid valve can be installed with the original automatic control circuit of the factory, which can save Other costs.

      Therefore, small solenoid valves are widely used due to their ease of assembly and high efficiency and energy saving advantages, and gradually occupy the market.

      As far as the product itself is concerned, the electric actuator has the advantages of assembly delay, low failure rate and meeting the industry's automation needs. When selecting various types of automatic valves, consideration should be given to factors such as the type of heat engine, the required accuracy, the quality of the control valve, the pressure drop, the flow rate and its structure, the failure rate, the credit of the manufacturer, and the after-sales service to achieve economical and practical purposes.

This article is original by the manufacturer of the magnetic turning column level gauge, please indicate http://www.sungofluid.com/

Hard seal butterfly valve