NEWS
- 07-282012
Reasons and treatment methods of electric actuator failure Reasons and treatment methods of electric actuator failureOne. Indicator light failure 1. Failure phenomenon: After the solenoid valve is energized to the electric actuator, it is found that the p···
- 07-272012
Definition and characteristics of electric ventilation butterfly valve Definition and characteristics of electric ventilation butterfly valve1. Electric ventilation butterfly valve Usage and characteristics This butterfly valve is made of the same material as the val···
- 07-262012
Common solenoid valve troubleshooting Common solenoid valve troubleshootingFailureCause analysis The seals at the joints are loose and the joints are damaged. The temperature of the medium does not match the electric actuator. There are i···
- 07-252012
Briefly introduce the advantages and uses of magnetic float level gauges Briefly introduce the advantages and uses of magnetic float level gauges The characteristics of the magnetic float level gauge: suitable for the measurement of the liquid level and interface of the···
- 07-232012
Introduction to the structural characteristics of high temperature solenoid valve Introduction to the structural characteristics of high temperature solenoid valveThe solenoid valve is a valve that relies on the electromagnetic force generated by the power supply coil to drive the ···
- 07-212012
Product features of high temperature solenoid valve Product features of high temperature solenoid valveSolenoid valve product characteristics: This valve is an indirect pilot balanced solenoid valve, which has the advantages of high temperature resista···
- 07-202012
Installation and applicable maintenance of magnetic float level gauge? The magnetic float level gauge (also called a magnetic flap level gauge) is developed based on the principle of buoyancy and magnetic coupling. When the liquid level in the measured container rises an···
- 07-192012
Overview and working principle of maglev level gauge The magnetic float level gauge consists of three parts: float, riser assembly and indicator. The float rises or falls with the change of the liquid level in the riser assembly, and the solenoid valve ···
- 07-172012
Instructions for selecting electric actuators! Instructions for selecting electric actuators!1. Determine the output torque of the electric actuator according to the torque required by the valve. The torque required for opening and closing of the ···